UHF Series 21 Lanen

The specially adapted impedance means that you can reproduce the high definition sound of a wired system in UHF. We also made sure that the electronics for the UHF side would prevent any interference, and that signal integrity would be optimized no matter what the conditions. Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound quality.

UHF Series 21 Lanen 

• PLL with 100 preset frequencies
• Frequency range: 640MHz – 675MHz
• Compatible with Série 21 intrument mics GL21 Acoustic Guitar & Ukulele, SB21 Sax & Brass, VL21 Violin & Altos and also CL21 Cello, BL21 Contrabass, PL21 Percussion
• 100 channel receiver: 6.35 mm output Jack + XLR

What about this system?

“Whatever wireless system you’re using, the most important aspects are the audio quality and the stability.

We’ve made the UHF Series 21 system in metal to give you perfect insulation, and to make sure your UHF sound is the same as wired sound: dynamic, rich and balanced.

The UHF wireless system uses an extremely stable phase-locked loop circuit and a dual antenna/dual receiver analogue wireless system (True Diversity) to prevent interference problems and guarantee signal integrity at all times.

Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound.”

Ludovic Lanen – Sound Engineer

DATOS TÉCNICOS

System:

Receiving mode: UHF True Diversity
Number of channels: 100 PLL selectable frequencies
Frequency range: 640MHz – 675MHz
S/N Ratio: >85dB
Total harmonic distorsion: <0.3% à 1KHz Bandwidth: 30 at 18000Hz (±3dB) Range in meters: approx 100m

Receiver:

Outputs: Jack (unbalanced) XLR (balanced)
RF squelch: >80dB
Weight: 800g
Dimensions (W x D x H): 210mm x 160mm x 53 mm

Bodypack:

Connections: MiniXLR with Jack 6.35mm active cable
Max output power: 8mW
Max SPL: 130dB
Battery (non supply) : alkaline battery (AA) or rechargeable battery NiMH type